Teledyne LeCroy UWBSpekChek and WiMedia Platform Test User Guide - Manual (Page 10)

UWBSpekChek™ WiMedia Platform Compliance
Test Guide
rev3.10 2 Page 10 of 33
4. The test system begins the 3 beacon + 1 skip cycle above indefinitely.
5. After 1 second, test system stops beaconing.
6. After at least 2 seconds, stop analyzer capture.
Notes:
• Background observation checks verify DUT & INTD follow correct signaling and
slot contraction behavior. The DUT & INTD fail if they violate any checks defined
in section 3.2. of the WiMedia Platform Test Specification.