A.5 dcom client configuration, Setting when and how authentication should occur, Dcom client configuration – Teledyne LeCroy Automation API for Bluetooth Analyzers User Manual

Page 97

Automation API for CATC Bluetooth Analyzers

CATC

Ver. 1.40

The following screen displays:

Step 2

Make sure that the Interactive User option is selected..

A.5 DCOM Client Configuration

DCOM client configuration is a four-step process:

Step 1

Set authentication to occur upon connection with the Host
Controller.

Step 2

Set the Host name or IP address of the server that the client will be
connecting to.

Step 3

Set Merlin commands to run on the Merlin Host Controller.

Step 4

Set the network protocol over which DCOM will run.

Setting When and How Authentication Should Occur

You specify when and how the client should be authenticated by performing
the following steps:

Step 1

Click the Windows Start button.