Teledyne LeCroy Automation API for Bluetooth Analyzers - Manual (Page 53)

47
Automation API for CATC Bluetooth Analyzers CATC Ver. 1.40
2.4.11 ITrace::GetTriggerPacketNum
Retrieves trigger packet number
Parameters
packet_number - points to long value where trigger packet number is retrieved
Return values
Remarks
Example
WSH:
CurrentDir = Left(WScript.ScriptFullName, InstrRev(WScript.ScriptFullName,
"\"))
Set Analyzer = WScript.CreateObject("CATC.Merlin")
Set Trace = Analyzer.MakeRecording (CurrentDir & "Input\test_ro.rec")
TriggerPacket = Trace.GetTriggerPacketNum
Trace.Save CurrentDir & "Output\trigger_portion.blt", CInt(ErrorPacket)-5,
CInt(ErrorPacket)+5
Trace.ExportToText CurrentDir & "Output\trigger_portion.txt", CInt(Error-
Packet)-5, CInt(ErrorPacket)+5
C++:
See an example for ITrace::GetPacketsCount
HRESULT GetTriggerPacketNum (
[out, retval] long* packet_number );