Teledyne LeCroy WaveAce EasyScope Operators Manual - Manual (Page 17)

EasyScope Operator's Manual
ES-OM-E-RevA 17
Wave Measurements
The WaveAce series oscilloscope can automatically measure 32 parameters. Once you have a waveform graph
displayed, you can view its' waveform measurements. You can copy, print, and save the waveform
measurements. You can also set Pass/Fail ranges for each measurement.
Note: You should use Auto mode when displaying waveform graphs to display waveform measurement values.
To display waveform measurements, click the Wave Measure button.
Copying Wave Measurements
You can copy waveform measurements quickly by clicking the Copy button at the top of the Wave Measure
window. This takes a screen print of the wave measurements so you can paste them in another application.
Printing Wave Measurements
You can print the wave measurement data by clicking the Print button at the top of the window. When you click
Print, a print preview of the wave measurement data is displayed.