Teledyne LeCroy WaveAce EasyScope Operators Manual - Manual (Page 10)

WaveAce
10 ES-OM-E-RevA
Toolbar
The Toolbar lets you quickly access EasyScope functions.

Press Connect to connect to your oscilloscope (this is the same as choosing Pa nel→Connect from the
menu bar).

Press Disc to disconnect your oscilloscope (this is the same as choosing Panel→Disconnect from the
menu bar).

Press Exit to exist the EasyScope application (this is the same as choosing Panel→Exit from the menu
bar).

Press Sidebar to turn the Base Control Panel On or Off (this is the same as choosing View→Base
Control Panel from the menu bar).

Press Panel to display the Virtual Panel. You can operate the oscilloscope using the Virtual Panel.

Press About to display information about your EasyScope software (this is the same as choosing
Help→About EasyScope from the menu bar).
Base Control Panel
The Base Control Panel is divided into three areas:

Goto View

Open Files

Device Setting Oper

Wave Graph - displays up to seven
waveforms at the same time in the
Graph Display Area.

Wave Data - displays data for up to
seven waveforms.

Wave Measure - displays waveform
measurement values for up to seven
waveforms.

DSO Bitmap - displays a bitmap image
of a waveform in the display area.

Graph file - click this button to recall
saved waveform graph files.

Data file - click this button to recall
saved waveform data files.

Measure file - click this button to recall
saved waveform measurement value
files.

Bitmap file - click this button to recall
saved bitmap image files.

Upload - uploads settings to your
oscilloscope

Download - downloads setting from your
oscilloscope