Pxd 222 digitizer – Teledyne LeCroy PXD222 User Manual

Page 18

Text mode
Original mode

ISSUED: November 2001

PXD222-OM-E Rev A

PXD 222 Digitizer

Launch Measurement and Automation Explorer (MAX)

Launch Measurement and Automation Explorer, and refresh the device list by pressing F5.

If the PXD 222 Digitizer is not found, or there is no “PXI System” list within the “Device and
Interfaces” folder, select “Update MAX driver support…” from the Tools menu.

Reboot when prompted, launch MAX, and refresh again by pressing F5. The PXD 222 Digi-
tizer will now appear in the list.

Note: the string “PXI0::19::INSTR” in the illustration below is the VISA Resource Name MAX
has assigned to the PXD 222 Digitizer. The actual name assigned will vary based on the PCI
bus number and slot where the PXD 222 Digitizer is installed.

Measurement and Automation Explorer with PXD 222 Digitizer recognized