Pc configuration and monitoring – System Sensor FAAST Networking User Manual
Page 18
![background image](/manuals/352663/18/background.png)
User Guide: FAAST Fire Alarm Aspiration Sensing Technology® Networking
18
PC Configuration and Monitoring
The FAAST aspiration smoke detector is configured using the PipeIQ software program and the network interface. The PipeIQ soft-
ware also provides tools for remotely monitoring the detector and reading historical event logs.
User Levels
The FAAST detector provides two different levels of remote access via the PipeIQ software. The access level is selected when con-
necting to a device.
Administrator
The Administrator user level provides access to all remote monitoring and configuration functions. Administrative access is required
to change the configuration of a FAAST detector or initiate a Test, Reset or Isolate the unit remotely. A password is required for Ad-
ministrative access.
Read-Only
The Read-Only user level provides access to the detector’s remote monitoring features. Read-Only users may also view configuration
data. Read-Only users cannot change a detector’s configuration or issue a remote Test, Reset or Isolate. No password is required
for Read-Only access.
Connection
To connect to the FAAST detector using the PipeIQ software, follow these steps:
1. Start the PipeIQ software application.
2. If you have previously created a project, open it using File -> Open. Or create a new project using File -> New.
3. Connect to the detector by right-clicking it and selecting Connect Device.