Steelcraft Automotive 180310 RUNNING BOARD - Manual (Page 8)

ALUMINUM VIEWPOINT RUNNING BOARDS
2014 SORENTO
Page 8 of 8 12/4/13 Rev1 (DP)
Passenger Side Installation Pictured
Fig 18A
Fig 18B
Complete Installation
Front
After Running Board has been properly
aligned and adjusted, hold the plastic cover
up in place against the front Bracket. Trace
the Bracket location onto the cover. Cut
slot out of cover to clear front Bracket.
IMPORTANT: Do not cut through the inner
or outer edge of the cover. Only remove
material required for Bracket clearance
IMPORTANT: Do not cut through outer
edge of the cover. Only remove material
required for Bracket clearance
Outline of Center Bracket