APC Silcon DP300E Series - Manual (Page 22)

22 User Guide Silcon DP300E Series 480V 400-500kVA
7OA0004 US rev. 02
Programming Parameters
Action Display shows
1. Press and simultaneously to open
for password input
2. Enter password xx xx xx by pressing
3. Press or until
4. Press for change
5. Press to store
6. Repeat steps 3 to 5 for the rest of the
parameters:
7. Wait about 1 second
8. Press to exit.
Key in password
:
Last selected
parameter
Highest station
address : 2
Data stored
Normal operation
RED. 3/3 1%
Highest station
address : 3
Highest station
address : 3
Station address
: 1
APM testmode
active : NO
Programming example – Highest Station No.
Parameters are selected by pressing the C key – one or more times.
Battery connection
: separate