APC Silcon DP300E Series - Manual (Page 17)

17 User Guide Silcon DP300E Series 480V 400-500kVA
7OA0004 US rev. 02
Programming Parameters
4.2.2 Keys used for programming
4.2.3 Programming example - switch to bypass operation
Action Display shows
1. Press to enter parameter stack
2. Press or until
3. Press until
4. Press to store
5. Press to exit
To return to normal operation
Action Display shows
6. Press to enter parameter stack
7. Press or until
8. Press until
9. Press to store
10. Press to exit
Programming of the other parameters can be performed in exactly the same way.
NOTE:
The display accuracy is
±
1-2%,
±
1 digit.
Bypass operation
Bypass operation
: NO
Bypass operation
: YES
Normal operation
load power xx%
Bypass operation
: NO
Bypass operation
: YES
NOTE:
This is only to illustrate an
example. Please see chapter
2.6 - 2.7 for further details.