Gilderfluke&Co BR-MultiBrick32 - Manual (Page 9)

valves, relays, LEDs and similar loads. Relays can be used to con-
trol higher current or voltage loads. If more than thirty-two outputs
are needed, additional BR-MultiBrick32s can be added to give you
as many outputs as you need.
• The BR-MultiBrick32 runs on anything from 9-24 VDC. BR-
MultiBrick32s can even be run from batteries.
• BR-MultiBrick32s mount in standard Brick card cages. These are
available with one, two, or sixteen slots. Styles are available for
mounting in 19” racks or independently. If space or budget con-
siderations require, the BR-MultiBrick32 can be mounted on screw
standoffs and connected using a sixty position IDS ribbon cable
connector.
A ‘Dumb’ Brick is typically used in stand alone applications,
where the show runs continuously or when triggered by an exter-
nal event. Multiple ‘Dumb’ bricks can be triggered simultaneous-
ly, but will not be automatically synchronized as the Bricks in a
‘Smart’ Brick system are. Because each ‘Brick’ can be run com-
pletely independently, each can be running its own time line
from its own trigger inputs.
A ‘Smart’ Brick system is used when you need to synchronize
any number of ‘Bricks’ together on a ‘Smart’ Brick Network under
the control of a single ‘Smart’ Brick Brain. The Brain itself allows
shows to be triggered at specific times of the day using a real
time clock and the Brains’ 365 day schedule, and locked (syn-
chronized) to Smpte time code, LaserDisks and DVDs, or the
Brains’ own internal or external clock. A single Brain and ‘Smart’
Brick network can run a single time line at one time.
G
ILDERFLUKE
& C
O
.• 205 S
OUTH
F
LOWER
S
TREET
• B
URBANK
, C
ALIFORNIA
91502 • 818/840-9484 • 800/776-5972 •
FAX
818/840-9485
E
AST
C
OAST
/F
LORIDA
O
FFICE
• 7041 G
RAND
N
ATIONAL
D
RIVE
• S
UITE
128d • O
RLANDO
, F
L
. 32819 • 407/354-5954 •
FAX
407/354-5955
3 of 36