Gilderfluke&Co BR-MultiBrick32 - Manual (Page 33)

“sA5A5” [nn] (card address) AutoDownload:
This is the format of the file that the BR-MultiBrick32 will receive
and load into its 'Flash' memory.
An AutoDownload file is a binary file. Any AutoDownload file
that has previously been saved can be sent to a BR-MultiBrick32
by selecting the ‘send binary file’ on your modem program and
selecting the AutoDownload file for sending. You must be sure
that the modem program has not been set to ‘gobble’ any spe-
cial characters (carriage returns, line feeds, etc.).
The Hyper Terminal program that comes with Windows ‘95 and
‘98 will not work for sending AutoDownloads. For some strange
reason it has been written to randomly change any binary value
that is larger than one hundred twenty-seven.
“~” RealTime Update:
This command sets the BR-MultiBrick32 into a mode where it
will update the outputs in realtime from the data received
through the serial port. The BR-MultiBrick32 uses this command to
update the outputs in real time.
The maximum frame rate supported by this function is thirty
frames per second. Any faster than this just won’t fit through the
PC’s serial port.
G
ILDERFLUKE
& C
O
.• 205 S
OUTH
F
LOWER
S
TREET
• B
URBANK
, C
ALIFORNIA
91502 • 818/840-9484 • 800/776-5972 •
FAX
818/840-9485
E
AST
C
OAST
/F
LORIDA
O
FFICE
• 7041 G
RAND
N
ATIONAL
D
RIVE
• S
UITE
128d • O
RLANDO
, F
L
. 32819 • 407/354-5954 •
FAX
407/354-5955
27 of 36