SecurityMan SmartCamDVR - User manual - Manual (Page 39)

35
FAQs
Q1. This device is equipped with infrared remote control. The reception
may be affected or operation does not work in the following cases:
A. Objects hindering the receiver or remote controller. The remote
controller deviating from the receiver too much (the horizontal
and vertical reception angle of the receiver approx. 90 degrees). The
distance between the remote controller and receiver too far (within 8
meters recommended). Low battery of the remote controller
B: If the remote control is no use for a long time, the batteries should be
taken out to avoid eroding circuits.
C: When the device is working or it is started up, the micro SD card can
not be take out to avoid damaging the card, device or files.
D: Please check the machine regularly. If any abnormal performance is
detected, please check the power or press “RESET” to reset the machine.
E: To avoid false motion-triggering, please avoid not putting the product
straightly to strong light.
F: If the product is used to watch out of the window, the motion
sensitivity may be decreased, or there will be false triggering due to
glisten of the glass.
G: In low-light condition, or the moving object being same color as
background, the sensitivity may be decreased.
Q. When I turned on my SmartCamDVR and try to record, I cannot
record video clips or take any pictures?
A. Please check if the Micro SD card is inserted with the pins/teeth
facing down and that the SD card clicks into place. Plug the A/C
adapter into the system in case the battery has drained.