SecurityMan SmartCamDVR - User manual - Manual (Page 26)

the blue indicator turns off
Press once
22
Next, press (don’t hold) the power/record button located on back
of the camera or the REC button on the RC (remote control) to start
video recording. At this point the SmartCamDVR will beep twice and the
indicator light will stay solid green whenever video recording has been
initiated. When left recording over a 24hr period, each recording will be
broken down into 15 minute increments.
To manually stop video recording, press (don’t hold) the power/record
button
located on back of the camera or the STOP button on the
RC (remote control). At this point the SmartCamDVR will beep 5 times
to indicate that there are new events recorded and return to stand-by
mode (solid blue light) when finished.
IMPORTANT NOTICE: The SmartCamDVR is not equipped Infrared
LED’s for night vision and requires a minimum of 10 LUX of lighting for
operation. We strongly recommend using the SmartCamDVR in a well lit
area as it may not record well in dark environments..