10 system setting – SecurityMan SmartCamDVR - User manual User Manual
Page 14
10
System Setting
Insert a Micro SD card (not included) into the Micro SD slot located on
the right side of the SmartCamDVR. Using the provided USB cable, plug
the smaller end into the back of the camera and the other end into a
computer as shown below.
Once connected, an AutoPlay window will appear. Please click on “
Open
folder to view files” option and then click on the “DVXSET.EXE” file to
launch the System Setting application as illustrated below. The System
Setting consists of the follow settings:
• Date
• Time
• Date/Time Format
• MD Sensitivity
• Refresh Rate (Hz)
• Resolution
• OverWrite
• Button Sound