SecurityMan SmartCamDVR - User manual - Manual (Page 16)

12
Date, Time, and Date/Time Format Setting
To set the date and time, click on the corresponding value as illustrated
below, then use the
(up) and (down) arrows to adjust the date and
time accordingly.
After setting the date and time, click on the (down) arrow located to
the right of the “Date/Time Format” label Date/Time Format to select
the date and time format to be used. There are three options available
for the
Date/Time Format; YY/MM/DD, DD/MM/YY, and MM/DD/YY
(default). When finished, click on the SAVE button at the bottom of the
window to confirm and save your changes.