Robertshaw 8601-1 - Manual (Page 9)

Begin Programmed Operation
1. Make sure the cursor is above PROG.
2. Place AUTO ON switch into AUTO.
3. Place HEAT-OFF-A/C switch into A/C or HEAT depending on
the season.
Temporary Program Hold
You can temporarily increase or decrease the temperature and hold it for
3 hours or until the next program event, whichever comes first.
1. Press the or button. The temperature will blink. Using the
or button, adjust the temperature to the desired level.
2. Press SET.
Another way to select a temporary hold is:
1. Press SELECT until the cursor is over TEMP HOLD. Press SET.
The temperature will be blinking. Use the or button to change
the temperature.
2. Press SET.
To cancel a temporary hold, press SELECT until the cursor is above PROG.
Press SET.
Vacation Hold
You can set your thermostat to hold a desired temperature for 1-365 days.
Vacation hold terminates at midnight of the last day. The thermostat
returns to normal operation the next day at 12:01 AM.
1. Press SELECT until the cursor is over VAC HOLD. Press SET. The
temperature will be blinking. Use the or button to change the
temperature.
2. Press SET. 365d will be displayed. Use the or button to adjust
between 1 and 365 days.
3. Press SET.
To cancel a vacation hold, press SELECT until the cursor is above PROG.
Press SET.
9
select set
hold
vac prog temp
MON ° F
a/c off heat on auto
a/c off heat on auto
select
hold
vac prog temp
110-1165 6/8/05 11:51 AM Page 9