Robertshaw 8601-1 - Manual (Page 10)

Check Filter Reset
Once the filter timer has expired,
CHECK FILTER will turn on and stay
on. To clear the message and reset
the timer:
1. Press SELECT and SET and hold
for 3 seconds. CLr will appear in
the time display.
2. Press any key to clear the message.
The display will transition to the tem-
perature scale display. See step 4 in
CUSTOMIZING YOUR THERMOSTAT.
3. No further input is needed. Within a few seconds, the display will
return to the normal operating mode.
Backlit Display
This thermostat is equipped with a backlight to make night time temper-
ature adjustments quick and easy. Press the
button to activate the
backlight. The backlight will turn off after about 10 seconds of inactivity.
Reset
The RESET button is located above the upper left corner of the display.
Only use the reset feature if the thermostat is malfunctioning.
10
C
R
G O B Y1 W1
MON ° F
RESET
BUTTON
110-1165 6/8/05 11:51 AM Page 10