allows other users to view the same computer port. Control of the port
is given to one user at a time, on a first-come, first-served basis and is
relinquished after a certain period of inactivity.

• Exclusive mode - press

and the left mouse button – This mode

prevents any other user from viewing or controlling the computer
port until you either select another computer or log off. This mode
should be used with care – it can also be blocked as an option by the
administrator.

• Video Only mode - press

and the left mouse button – This mode

displays the video picture of the port, but prevents keyboard or mouse
activity from controlling the computer.

• Escape without selecting a port – press the right mouse button.

Logging in and out (KVM section)

The SmartView World features a straightforward security system that helps to
prevent unauthorised access to some, or all, connected computers.
Note: If you are a remote IP user, then a separate IP login and password are
required in addition to (and in advance of) the KVM details – see

Logging in

and out (IP section)

for more details.

If the security option has been selected by your administrator then you will be
asked to enter a User Name and Password when you first access a user port.
When you have finished using the system, it is then good practice to logout,
forcing any other users to authenticate themselves prior to use.
Note: If the security option has not been enabled then no login is required.

To log in to the SmartView World (KVM section)

1 If it is not already displayed, move the mouse or press any key to display the

2 Enter your designated User Name and press

3 Enter your designated Password and press

. If both entries are correct

then the selected port will be displayed.
Note: If either the User Name or Password are incorrect, the entries will be
cleared to allow another attempt.

To log out from the SmartView World (KVM section)

1 Select the on-screen menu in one of three ways:

• By simultaneously pressing and then releasing

Note: The

and

hotkeys may have been changed. If the

combination fails to work, then please contact the system administrator
for details.

• By pressing the middle and right buttons of a three button mouse, or
• By selecting port using the front panel buttons

2 Press . The KVM login window will be displayed.

Alternatively:

• Press

and at any time to log out.