The IP configuration panels allow you to determine how the SmartView World
appears and operates to a remote user connected via a Web browser and IP link.
The layout and operation of the IP configuration panels are quite different to the
menus of the SmartView World KVM configuration section. The most apparent
differences are:

• The top level user login is ‘super’ rather than ‘ADMIN’.
• Navigation is primarily via mouse clicks on browser panels as opposed to

keypresses within a more-traditional menu structure.

• User names and passwords are case-sensitive (in the KVM switching section

of SmartView World they are not).

The IP section of the SmartView World also maintains its own security access
user names and passwords, which are independent to those within the KVM
switching section. This provides an extra level of security against unauthorised
users who might infiltrate the system via an IP connection. The separate IP
and KVM user names and passwords for each user can be made the same or
different according to your requirements.
Note: SmartView World supports 128bit encryption and you are recommended
to use secure links whenever possible using the following browsers:

• Microsoft Internet Explorer version 5.5 or higher
• Netscape Navigator version 7.0 or higher
• Mozilla 1.0 or higher

Use the prefix https to engage a secure link (e.g. https://192.168.1.22).

To access the IP configuration panels
Before the IP section of the SmartView World can be accessed, ensure that the
two connection and configuration stages have first been completed:

•

To initially connect and configure the IP port (stage 1 of 2)

•

To make the final IP port connection (stage 2 of 2)

1 Use a suitable web browser on an IP-connected computer to access the IP

address given to the SmartView World during the initial connection stage. If
the connection is successful, the login screen will be displayed: