Finish Thompson SP11/15 SERIES SELF-PRIMING - Manual (Page 17)

Component ▼ Base ▼ Code ▼
T
R
O-ring FKM or E
B
1 (60 Hz) 2 (60 Hz) 3 (60 Hz) 4 (60 Hz) 5 (60 Hz) 6 (50 Hz) 7 (50 Hz) 8 (50 Hz) 9 (50 Hz) 10 (50 Hz)
4.63” 4.38” 4.13” 3.88" 3.63" 5.25" 5.00" 4.75" 4.50" 4.25"
14
18
84
94
04
24
85
95
05
25
Ge
Si
Hs
Ti
Ns
Vv
Ve
Motor Not Standard Select Motor Reference Number from Motor Price Sheets
or
O-ring vapor protection kit - FKM
O-ring vapor protection kit - EPDM
PTFE
Alumina Ceramic
EPDM
BSP
Union
Steel Enforced Flange
FRP flange
SiC bushing/thrust ring/shaft
Hastelloy shaft
Titanium Hardware
Specials Not Standard
Non-sparking ring
IEC 112/B5
Gas engine mounting (requires 10-pole upgrade)
IEC 80/B5
IEC 90/B5
IEC 100/B5
IEC 90/B14
IEC 100/B14
IEC 112/B14
145TC NEMA
184TC NEMA
IEC 80/B14
Motor Adaptor 56C NEMA
8p
10p
8-Pole: 3 HP/2.2 kW (56C/145//80/90 frame)
10-Pole: 4 to 5 HP/ 3 to 4 kW (184/100/112 frame and "Ge" gas engine)
Magnet
(Upgrade for
specific gravity
corrections)
6-pole
Up to 2 HP /1.5 kW
(56C/145/80/90
frame)
or
Impeller or
Fs
Ff
Connection NPT or
U
Bushing Carbon or
Alternative ▼
Alternative Components
SP11 / SP15 PART NUMBER EXPLANATION
NOTE: Pump end includes wetted components, drive magnet and motor adapter. The wet end incudes wetted components only.
Part Number Explanation
The base model number contains standard components. Where standard components are not suitable, add the alternative component code
after the base model number to substitute components. Example: SP11-E-U-14 is constructed of the listed base model components except it
has an EPDM o-rnig, union connections, and a 145TC motor adapter.
The model number is on the serial number label located on the motor adapter. The model number contains a base model that features certain
standard components.
Compare the model number on the pump to the adjacent chart to determine if the pump contains any alternate components. Model numbers
containing “P” have primary components molded from polypropylene. Model numbers containing “V” have primary components molded from
PVDF.
Base model numbers are: SP11P, SP11V.
17