Service technician’s responsibilities, Users’ responsibility – Fairbanks Aegis Coil Scales User Manual

Page 10

Section 2: General Service Policy

04/10

51205 Rev. 2

2.1.1. Service Technician’s Responsibilities

• All electronic and mechanical calibrations and/or

adjustments required for making this equipment
perform to accuracy and operational specifications
are considered to be part of the original installation.
─ They are included in the installation charge.
─ Only those charges which are incurred as a result

of the equipment's inability to be adjusted or
calibrated to performance specifications may be
charged to warranty.

• The equipment consists of printed circuit assemblies which must be handled

using ESD handling procedures, and must be replaced as units.
─ Replacement of individual components is not allowed.
─ The assemblies must be properly packaged in ESD protective material and

returned intact for replacement credit per normal procedures.

2.1.2. Users’ Responsibility



Absolutely no physical, electrical or program modifications other
than selection of standard options and accessories are to be
made to this equipment.