Acer Altos R710 - Manual (Page 92)

4 Configuring the system 80
Upgrading the system memory
To remove a DIMM
Before installing a new DIMM in a socket, remove first any previously
installed DIMM from that socket.
Important: Before removing any DIMM from the mainboard,
make sure to create a backup file of all important data.
1 Observe the ESD precautions and pre-installation procedures
described on page 34.
2 Locate the DIMM sockets on the mainboard.
3 Press the holding clips on both sides of the socket outward to
release the DIMM .
4 Gently pull the DIMM upward to remove it from the socket .
Note: Place your forefingers on the top of the DIMM before
pressing the holding clips to gently disengage the DIMM from the
socket.