Acer Altos R710 - Manual (Page 83)

71
Hardware Requirements
To avoid integration difficulties and possible board damage,
your system must meet the requirements outlined below. For a
list of qualified components.
Processor
One or two Intel® Xeon™ processors with an 800MHz front side bus
and a minimum of 2.8 GHz frequency must be installed. The following
table outlines the supported processors. For a complete list of
supported processors.
CMOS Clear
(line “C” in
figure
above) 1-2 These pins should be jumpered for normal system
operation.
2-3 If these pins are jumpered, the CMOS settings will
be cleared on the next reset. These pins should not
be jumpered for normal operation.
Processor Family FSB Frequency Frequency
Intel® Xeon™ 800 MHz 2.8 GHz
Intel® Xeon™ 800 MHz 3.0 GHz
Intel® Xeon™ 800 MHz 3.2 GHz
Intel® Xeon™ 800 MHz 3.4 GHz
Intel® Xeon™ 800 MHz 3.6 GHz
Jumper
Name
Pins What happens at system reset??