Teledyne 6750 - Total Organic Carbon analyzers - Manual (Page 44)

Setup and Operation Model 6750
Teledyne Analytical Instruments 32
• The current TOC value,
• [IR] IR response
• [Flow] Carrier Gas Flow rate
• [m] Available Memory (kb).
4.2.2 Parameter Menu
Although your analyzer has been optimally configured for your
application, on initial startup the setup parameters should be verified
Consult Factory Settings for Your Application – “As Built Drawings” in
the Appendix.
To get to the Parameters menu:
1. From the Run Screen, select [EDIT]. The following
menu will appear.
Note: Options not included in your analyzer will have no
response, if selected.