Teledyne 6750 - Total Organic Carbon analyzers - Manual (Page 13)

Total Organic Carbon Analyzer Introduction
Teledyne Analytical Instruments 1
Introduction
Teledyne Model 6750 Total Organic Carbon Analyzer provides
accurate and reliable on-line TOC analysis with Windows™ CE
Operation, using the UV/Heated Persulfate Oxidation Method.
This manual includes all necessary information to help you install,
operate and service your Analyzer.
The Model 6750 TOC Analyzers have been designed for easy
operation and maintenance. Particular attention has been devoted to the
design, whereby any module can be replaced by the operator within 15
minutes. Components such as the NDIR unit have been specifically
designed with no moving parts and use a corrosion resistant design to
further reduce maintenance tasks.
Operating the analyzer is easy. It uses a standard, industrial
Windows CE computer programmed for complete automatic control
(there are no operator manual adjustments). Operators are advised to
study pertinent chapters in this manual to fully utilize the capabilities of
the analyzer and avoid problems that could be associated with any
instrument. The Model 6750 TOC is shown in Figure 1-1.
1.1 Main Features of the Analyzer
The Model 6750 TOC Analyzer is sophisticated, yet simple to use.
The main features of the analyzer include:
• TC (Total Carbon) analysis
• NPOC (Non-purgeable organic carbon) analysis
• TOC-True Analysis (including volatile organics)
• Microsoft Windows Touch Screen Computer with Paperless
Chart Recorder
• Two alarm levels
• One Master Fault Alarm
• 3 analog 4-20 mA outputs