beautypg.com

Teledyne 3350 - Microprocessor based control room monitor for personnel safety User Manual

Page 19

background image

3-3

Alarm Oxygen Monitor

Installation 3

Teledyne Analytical Instruments

Figure 3-1 Electrical Connectors for AC Control Unit

Figure 3-2 Electrical Connectors for DC Control Unit

3.5 Power and Signal Connections

AC and Battery Backed Standby Power

This 3350 is designed to operate from 100-240VAC @ 50/60 Hz

power. Connect the included power cord to the AC power as shown in Fig.
3-3 for standard AC unit and Fig. 3-4 for battery backed standby power.

3.5.1

Primary Input Power (AC version): The power cord

receptacle, fuse block and Power switch are on the Control Unit. A 6-foot,
standard AC power cord is supplied with the analyzer.