Teledyne 3020M - Explosion proof paramagnetic oxygen analyzer - Manual (Page 54)

4 Operation Model 3020M
4-18 Teledyne Analytical Instruments
Use STANDBY whenever you want to power down without danger
loosing all of the configuration you programmed into your instrument in the
Setup Mode.
4.14 The Analysis Mode
This is the normal operating mode of the analyzer. In this mode the
analyzer is monitoring the sample, measuring and displaying the amount of
oxygen, and reporting alarm conditions.
Normally, the Version, Self-Test, Sensor, Main Menu, and the Span
and Zero (in auto-settling mode) functions automatically switch back to the
Analysis Mode ANALYZE screen when they have completed their assigned
operations. After four or five seconds in the MAIN MENU without any action
by the operator, the analyzer automatically switches itself back to the ANA-
LYZE screen. ESCAPE, asserted one or more times, depending on the
starting point, also switches the analyzer back to the ANALYZE screen.
4.15 Sensor Function
Not Used on the 3020M. This function tests micro-fuel sensor output
on the 3020 for those that are using it.