Teledyne 2000XTC - Thermal conductivity analyzer - Manual (Page 37)

Thermal Conductivity Transmitter Appendix
Flow Rate 0.4-2.0 SCFH
Internal Heater: 2—1.5W heaters
Temp Control: Factory set to 20 ± 2°C
User settable
Calibration Controls: Zero, span and temperature control
Fuses: Input power circuit: 400 mA
Output Signal Circuit: 50 mA
Heater Circuit: (2) 160 mA
Mounting (transmitter): Wall-mount (see section 3.2)
Mounting (interface unit): DIN-rail mounting (see section 3.3)
Teledyne Analytical Instruments 27