Accton Technology ES3526XA - Manual (Page 454)

Command Line Interface
4-212
4
ip igmp snooping
This command enables IGMP snooping on this switch. Use the no form to disable it.
Syntax
[no] ip igmp snooping
Default Setting
Enabled
Command Mode
Global Configuration
Example
The following example enables IGMP snooping.
ip igmp snooping vlan static
This command adds a port to a multicast group. Use the no form to remove the port.
Syntax
[no] ip igmp snooping vlan vlan-id static ip-address interface
• vlan-id - VLAN ID (Range: 1-4094)
• ip-address - IP address for multicast group
• interface
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-26/52)
• port-channel channel-id (Range: 1-4)
Default Setting
None
ip igmp snooping version Configures the IGMP version for snooping GC 4-213
ip igmp snooping
immediate-leave
Enables IGMP immediate leave for a VLAN interface IC 4-213
show ip igmp snooping Shows the IGMP snooping and query configuration PE 4-214
show mac-address-table
multicast
Shows the IGMP snooping MAC multicast list PE 4-214
Console(config)#ip igmp snooping
Console(config)#
Table 4-69 IGMP Snooping Commands
Command Function Mode Page