Accton Technology ES3526XA - Manual (Page 398)

Command Line Interface
4-156
4
Address Table Commands
These commands are used to configure the address table for filtering specified
addresses, displaying current entries, clearing the table, or setting the aging time.
Console#show lacp sysid
Port Channel System Priority System MAC Address
-------------------------------------------------------------------------
1 32768 00-30-F1-8F-2C-A7
2 32768 00-30-F1-8F-2C-A7
3 32768 00-30-F1-8F-2C-A7
4 32768 00-30-F1-8F-2C-A7
Console#
Table 4-53 show lacp sysid - display description
Field Description
Channel group A link aggregation group configured on this switch.
System Priority
* LACP system priority for this channel group.
System MAC Address
* System MAC address.
* The LACP system priority and system MAC address are concatenated to form the LAG system ID.
Table 4-54 Address Table Commands
Command Function Mode Page
mac-address-table static Maps a static address to a port in a VLAN GC 4-157
clear mac-address-table
dynamic
Removes any learned entries from the forwarding database PE 4-158
show mac-address-table Displays entries in the bridge-forwarding database PE 4-158
mac-address-table
aging-time
Sets the aging time of the address table GC 4-159
show mac-address-table
aging-time
Shows the aging time for the address table PE 4-159