beautypg.com

Ntp poll – Accton Technology ES3526XA User Manual

Page 300

background image

Command Line Interface

4-58

4

Default Setting

Version number: 3

Command Mode

Global Configuration

Command Usage

• This command specifies time servers that the switch will poll for time updates

when set to NTP client mode. It issues time synchronization requests based
on the interval set with the ntp poll command. The client will poll all the time
servers configured, the responses received are filtered and compared to
determine the most reliable and accurate time update for the switch.

• You can configure up to 50 NTP servers on the switch. Re-enter this

command for each server you want to configure.

• NTP authentication is optional. If enabled with the ntp authenticate

command, you must also configure at least one key number using the ntp
authentication-key
command.

• Use the no form of this command without an argument to clear all configured

servers in the list.

Example

Related Commands

ntp client (4-57)
ntp poll (4-58)
show ntp (4-60)

ntp poll

This command sets the interval between sending time requests when the switch is
set to NTP client mode. Use the no form to restore to the default.

Syntax

ntp poll seconds
no ntp poll

seconds - Interval between time requests. (Range: 16-16384 seconds)

Default Setting

16 seconds

Command Mode

Global Configuration

Console(config)#ntp server 192.168.3.20
Console(config)#ntp server 192.168.3.21
Console(config)#ntp server 192.168.4.22 version 2
Console(config)#ntp server 192.168.5.23 version 3 key 19
Console(config)#

This manual is related to the following products: