Enabling or disabling gvrp (global setting), Displaying basic vlan information, Figure 3-76 – Accton Technology ES3526XA User Manual
Page 186: Globally enabling gvrp, Figure 3-77, Vlan basic information
Configuring the Switch
3-142
3
Enabling or Disabling GVRP (Global Setting)
GARP VLAN Registration Protocol (GVRP) defines a way for switches to exchange
VLAN information in order to register VLAN members on ports across the network.
VLANs are dynamically configured based on join messages issued by host devices
and propagated throughout the network. GVRP must be enabled to permit automatic
VLAN registration, and to support VLANs which extend beyond the local switch.
(Default: Disabled)
Web – Click VLAN, 802.1Q VLAN, GVRP Status. Enable or disable GVRP, and click
Apply.
Figure 3-76 GLobally Enabling GVRP
CLI – This example enables GVRP for the switch.
Displaying Basic VLAN Information
The VLAN Basic Information page displays basic information on the VLAN type
supported by the switch.
Field Attributes
• VLAN Version Number
12
– The VLAN version used by this switch as specified in
the IEEE 802.1Q standard.
• Maximum VLAN ID – Maximum VLAN ID recognized by this switch.
• Maximum Number of Supported VLANs – Maximum number of VLANs that can
be configured on this switch.
Web – Click VLAN, 802.1Q VLAN, Basic Information.
Figure 3-77 VLAN Basic Information
Console(config)#bridge-ext gvrp
Console(config)#
12. Web Only.