Accton Technology ES3526XA - Manual (Page 342)

Command Line Interface
4-100
4
Example
show network-access mac-filter
Use this command to display MAC authentication filters.
Syntax
show network-access mac-filter [filter-id]
filter-id - Specifies a filter number. (Range: 1-64)
Default Setting
Displays all filters.
Command Mode
Privileged Exec
Example
show network-access mac-address-table
Use this command to display secure MAC address table entries.
Syntax
show network-access mac-address-table [static | dynamic]
[address mac-address [mask]] [interface interface] [sort {address |
interface}]
• static - Specifies static address entries.
• dynamic - Specifies dynamic address entries.
• mac-address - Specifies a MAC address entry. (Format: xx-xx-xx-xx-xx-xx)
• mask - Specifies a MAC address bit mask for filtering displayed addresses.
• interface - Specifies a port interface.
Console#show network-access interface ethernet 1/1
Port:1/1
--------------------------------------------------
--------------------------------------------------
MAC Authentication :Disabled
Maximum MAC Count :1024
Dynamic VLAN Assignment :Disabled
Reauthentication Time :1800
Authenticated Age :300
MAC Filter ID :None
Console#
Console#show network-access mac-filter 1
--------- -----------------
Filter-id MAC-Address
--------- -----------------
1 00-12-34-56-78-9A
1 00-12-34-56-78-9B
1 00-12-34-56-78-9C
Console#