Detroit Radiant Products Company SV Series - Manual (Page 11)

Key
Tube Installation Sequence
SV Series
11
20 Foot
50 Foot
60 Foot
70 Foot
30 Foot
40 Foot
Figure 2.4 • Tube Installation Sequence
Burner Control Box with
16” Burner Tube
Combustion Chamber
Coated Aluminized
Radiant Emitter Tube
Standard Tube Clamp
Stainless Steel Tube
Clamp (P/N: TP-220)
175-200 MBH models only - Located
between 1st and 2nd 10 ft. tube sections.
Important! The combustion chamber & radiant tube sections must be installed in the following order.
Note: Refer to the Tube Heater General Manual, Chart 3.6 (page 23) for secured reflector joints.
Baffle Location
80 Foot
Stainless steel clamp location on 175 - 200 MBH models only (P/N: TP-220).
Stainless steel clamp location on 175 - 200 MBH models only (P/N: TP-220).
Stainless steel clamp location on 175 - 200 MBH models only (P/N: TP-220).
Stainless steel clamp location on 175 - 200 MBH models only (P/N: TP-220).
Exhauster Pump Assembly
Security Chain Location (P/N: THCS)
2.0 Installation • Tube Installation Sequence • Heater Length