Detroit Radiant Products Company QTS Series - Manual

WARNING
!
Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read the installation, operation and maintenance
instructions thoroughly before installing or servicing this equipment.
This heater
must be installed and serviced by trained gas installation and service
personnel only. Failure to comply could result in personal injury, asphyxiation, death,
fire or property damage.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance.
In locations used for the storage of combustible materials, signs
must be posted to
specify the maximum permissible stacking height to maintain the required clearances
from the heater to the combustibles. Signs must either be posted adjacent to the
heater thermostats or in the absence of such thermostats, in a conspicuous location.
Not for residential use! Do not use this heater in the home, sleeping quarters,
attached garages, etc. Installation of a commercial tube heater system in residential
indoor spaces may result in property damage, serious injury, asphyxiation or death.
QTS Series
Installation Manual
The QTS Series Infrared Tube Heater is a negative pressure, single-stage radiant heater system. This
manual provides specific information related to the QTS Series model. All persons involved with the
installation, operation and maintenance of the heater system must read and understand the information
in this manual.
For Your Safety
If you smell gas:
• Open windows. • Do not try to light any appliance.
• Do not touch any electrical switch. • Immediately call your gas supplier from a neighbor’s phone.
• Extinguish any open flame. • Follow the gas supplier’s instructions.
• Do not use any phone in your building. • If you cannot reach your gas supplier, call the fire department.
Keep these instructions for future reference.
LIOQTS-Rev. 30612
Print: 1M-11/11_r5-7/14(CDS)
Replaces: LIOQTS-1M-1/11(DRP)