Micromod RetroPAK: MOD 30 Installation Manual - Manual (Page 17)

MOD 30ML Replacement for MOD 30 Instruments
REPLACEMENT CONSIDERATIONS
Table 2-1. I/O Signals Assigned to Dedicated Locations
Signal Location
Digital Input No. 1 Module Location S1
Digital Input No. 2 Module Location S2
Digital Input No. 3 Module Location S11
Digital Output No. 1 Module Location S3
Digital Output No. 2 Module Location S4
Digital Output No. 3 Module Location S5
Digital Output No. 4 Module Location S6
Analog Input No. 1 Built-in Volt Input No. 1
Analog Input No. 2 Built-in Volt Input No. 2
Analog Output No. 1 Built-in milliamp Output No. 1
Analog Output No. 2 Built-in milliamp Output No. 2
Table 2-2. I/O Signals Which Share a Module Location - No ICN Module Installed
Communications
Analog
Input
Digital
Input
Digital
Output
I/O Module
Location
//////// No. 5 No. 7 ////// Location S7
//////// No. 6 No. 6 No. 7 Location S8
//////// No. 3 No. 5 No. 6 Location S9
//////// No. 4 No. 4 No. 5 Location S10
Built-in ICN //////// //////// //////// ////////
Table 2-3. I/O Signals Which Share a Module Location - ICN Module Installed
Communications Analog
Input
Digital
Input
Digital
Output
I/O Module
Location
ICN Module //////// //////// //////// Locations S7&S8
//////// No. 3 No. 5 No. 6 Location S9
//////// No. 4 No. 4 No. 5 Location S10
RS-232 Port //////// //////// //////// ////////
13