MAX LM-380A - Manual (Page 58)

TROUBLE SHOOTING
58
9. TROUBLE SHOOTING
9-1 ERROR MESSAGE LIST
Error message Contents Solution
OVER INPUT
CHARACTER NO.
Number of characters inputted has
exceeded 2,000 characters.
Characters more than 2,000 cannot be
inputted.
OVER INPUT LINE
NO.
Number of lines of the document to
be inputted has exceeded 4 lines.
The maximum lines are 4 lines.
OVER INPUT BLOCK
NO.
Number of blocks of the document
has exceeded 300 blocks.
Blocks more than 300 cannot be
inputted.
UNUSUAL POSITIOIN The cursor position is not correct. Move the cursor to the normal position.
UP TO 1PCS IN EACH
BLOCK
It was attempted to set 2 sequential
numbers in one block.
Only one sequential number can be set
in one block.
UP TO 15PCS IN 1
FILE
It was attempted to set more than
16 sequential numbers in [PITCH
PRINT MODE].
In [PITCH PRINT MODE], only up to 15
sequential numbers can be set in an
entire document.
OVER [N] NO.
It was attempted to set more than
16 sequential numbers were in
[PITCH PRINT MODE].
In [PITCH PRINT MODE], only up to 15
sequential numbers can be set in an
entire document.
SET ONLY ONE [N]
It was attempted to set more than 2
sequential numbers in [NORMAL
PRINT MODE].
In [NORMAL PRINT MODE], only one
sequential number can be set.
DELETE OTHER [P]
When there are several [P] marks, it
was attempted to delete the first [P]. The first [P] should be deleted at last.
SET [P] IN FRONT OF
WORD
In the [NORMAL PRINT MODE], it
was attempted to input [P] mark
while inputting a document.
When changing from the [NORMAL
PRINT MODE] to the pitch print mode,
move the cursor to the top of a
document before setting the pitch.
OVER [P] NO.
It was attempted to set 6 pitch
length settings in a whole
document to be inputted.
Only 5 pitch length settings can be
set in a whole document to be
inputted.
NO COPIED DATA
There are no data “COPIED” or
“PASTED.”
Implement the “PASTE” after
“COPY.”
Note: If the power is turned off, the
data copied is deleted.
OVER COPY
CAPACITY
It was attempted to copy a block
with more than 50 characters.
The block with more than 50
characters cannot be copied.