MAX LM-380A - Manual (Page 14)

BEFORE USE
14
2-7 CLEANING THE PLATEN ROLLER OR REMOVING A JAMMED TUBES
(“FEED” function)
1. Open the cassette cover.
2. While pressing C , press ON/OFF for
about 3 seconds.
Then, release ON/OFF first while
displaying the logo of “LETATWIN.”
3. [FEED screen] appears.
4. Slide the switching lever (silver) until it stops.
5. Put wet cloth with water or alcohol to the
platen roller and clean it using / key.
Note: If the tube is jammed, remove the consumables using this “FEED” function. Do not pull
the tube by hand.
fb22 fb22 fb22 fb22