MAX LM-380A - Manual (Page 18)

LOADING THE CONSUMABLES
18
3-2 LOADING THE TUBES AND THE INK RIBBON CASE
1. Open the cassette cover.
2. Push the head release lever (green).
3. Slide the switching lever (silver) until it
stops.
4. a: Pass the tubes under the holding
plate.
b: Extrude the tip of the tubes
by 1
t
2cm from the machine.
5. Place and hold the tube on the “TUBE”
label and slide the “Switching lever” to
lock.
Holding plate
Pull out
1~2cm
Switching lever
Head release lever
Switching lever