MAX LM-380A - Manual (Page 42)

USING FUNCTIONS
42
4. Press key to move the cursor to the “END.” And then
Press / key or Ten key to input the value of the “END.”
5. Press ENTER .
Note: Make sure that set both the “START” number and the “END” number.
In the [PITCH PRINT MODE], you can set only one series of “SEQUENCE” in one block
and up to 15 series of “SEQUENCE” in one document.
In the [NORMAL PRINT MODE], you can set only one series of “SEQUENCE” in one
document.
When you change the [PITCH PRINT MODE] to the [NORMAL PRINT MODE], all the
“SEQUENCE” setting should be automatically cancelled except for the first
“SEQUENCE” setting.
6-9 FRAME
Setting to frame a document.
This function allows you to completely surround the text with a frame.
LM-380A
LM-380A
1. Press SHIFT RPT (FRAME). The [FRAME setting
screen] appears.
2. Press / key to select “YES” and press ENTER .
Note: In the [PITCH PRINT MODE],” the “FRAME” is applied to each block.
In the [NORMAL PRINT MODE], the “FRAME” is applied to the whole document.
!" !" !" !"E   ` P9 P9 P9 P9 943 943 943 943
ዝዞዟ፧
9© ‚ —† 9© ‚ —† 9© ‚ —† 9© ‚ —† 3— 3— 3— 3—
2b0 2b0 2b0 2b0f† † † † ! ! ! !
B P
Selectable items: YES, NO
F f ‚ © G 2eI F f ‚ © G 2eI F f ‚ © G 2eI F f ‚ © G 2eI
ƒ2 ƒ2 ƒ2 ƒ2 0 0 0 0