Magnum Venus Plastech CB-6000-RGT Imperial units PROGRAMMING - Manual (Page 9)

8
Step 9) Pushing the Down Cursor button will change the display to look
like this:
This step allows you to select the type of output signal you want. Pushing
the Right Cursor button allows you to change to a LAtched signal or a
FoLLower type signal. The PuLSE is normal.
Step 10) Pushing the Down Cursor button will change the display to
look like this:
This tells you which inputs are active and is adjustable only by connecting
more inputs. This display is normal.
Step 11) Pushing the Down Cursor button will change the display to
look like this:
This allows you to select which alarm out you wish to use, 1 or 2. Push
the Right Cursor button to highlight the one you wish to use and then
push the INCREMENT/ON button to lock it in.
Step 12) Pushing the Down Cursor button will change the display to
look like this: