Magnum Venus Plastech Quick Shot - Manual (Page 17)

Quick Shot Operations Manual
Rev. 03/2013 Page | 17
SPECIFICATIONS:
Output:
4 to 8 lb. (1.8 to 3.5 kg) per min.
Catalyst %: 1% to 2.5% by volume
Air Consumption: 6 cfm
Length:
25 inches (63.5 cm)
Width: 33 inches (83.8 cm)
Height: 54 inches (137 cm)
Weight: 200 lbs. (91 kg)
AIR REQUIREMENTS:
Air supply should be clean, dry compressed air at up to 90 -100 PSI (6 – 7 bar) and a
minimum of 10 CFM. MVP recommends the use of an air hose that is ½ inch in
diameter. If air supply hose is too long or too small in diameter, the resin pump may
starve for air.
TOOL REQUIREMENTS:
1.
Flat-tip screwdriver with ¼ inch tip
2. 6-inch adjustable wrench
3. 12-inch adjustable wrench
4. 14-inch pipe wrench
5. 7/16-inch open-end wrench