Liquid Controls HML210 IOM - LCMag - Manual (Page 38)

HML 210
38
For each formula you can
associate:
‰ Product quantity
‰
Product name
‰ Maximum time for
batch (safety time for
each formula)
After activating the batch
function from visualization
page,
proceed as
illustrated and described in
the aside example.
BATCH FUNCTION CONFUGURATION
VISUALIZATION PAGE WITH BATCH FUNCTION ENABLED
PROGRAMMING A BATCH
Programming formula n°
Product Name
Batch in progress
Visualizations:
1) batch off: n° batch effected
2) batch on: decrease safety timer
3) programming: programming safety timer
indefinite if timer=0 timer disabled
Programming batch quantity
Visualization batched product
Input key code
Choose the formula number for associate
quantity batch (between 00 and 15)
Input quantity product for each batch
Input product name for batch (max 8 characters.)
Input maximum time for batch
If timer = 0, safety timer disabled max time set
= 6000 sec.
N.B. If one of the outputs has a batch alarm
assigned. Upon the completion of the batch or
an interruption, an alarm is activated.
From the visualization pages
ENABLE BATCH
Select one of the following functions to enable and program the batch on the converter:
‰ POS. 5.9-10: START/STOP batch from input
‰ POS. 6.1-2: assign one of the functions ouputs one and/or two
Some examples of operation of such functions are visualized from page 14.
Long push
Long push