beautypg.com

Laurel Electronics LAUREATE SERIES 2 SERIAL INPUT METER & REMOTE DISPLAY User Manual

Page 26

background image

26

Click on the Relay Alarms tab to set up your meter’s two or four optional relays. The same
digital source is used for all relays and must be set to Item 3 under Alarm Source. A
separate Setpoint and a Hysteresis band or Deviation band can be set up for each relay.
The relays will respond to your digital entries without decimal point.

For help with any selectable item, select that item with your cursor and press the F1 key.
This will bring up a help window like the one shown.