beautypg.com

Aiphone FK1629 User Manual

Page 35

background image

35

GETTING STARTED

USING THE SYSTEM

APPENDIX

SETTING AND ADJUSTMENT

Viewing video images at the target station

When you are receiving a call from, communicating with a door
station, or monitoring a door station in your site, you can view
video images at the target station.

Use the following functions on the master station to control
video images as you prefer. (→P. 23-24)

Switching Zoom/Wide

Pan & Tilt

Adjusting images

NOTE:

Video images cannot be controlled during scan-monitoring.

Paging

The system allows you to page (transmit an announcement)
the selected zone(s) and/or station(s) simultaneously.

For paging a remote site, you can page the zone registered

*

as the target in the site.

NOTE:
If you use zones, register zones in the System setting on a PC in
advance.

Search for and select the zone or remote site you

1

want to page (so that it is highlighted) in one of the

search methods. (→P. 27-32)

You can select up to 5 zones and/or stations in your site

*

for paging. (→P. 29)
For paging a zone in a remote site, you cannot select

*

a zone. If you page (the pilot zone in) a remote site by

searching for it from [REMOTE SITE] of SEARCH LIST,

select the target site, and then select [PAGING] (so that

it is highlighted). (→P. 31)

To set the priority (when “[

2

] PRIORITY” is

displayed), press ZOOM/WIDE , and then press

to select the target priority (so that it is highlighted).

If you

*

will not set the priority, skip this step and press

TALK or lift the handset. You can start paging after a

tone.

Press

3

TALK or ZOOM/WIDE , or lift the handset

(when “[

] [

] PAGE” is displayed).

After a tone rings, start paging.

4

A receiver can answer it and communicate with you

5

by pressing

TALK

or lifting the handset.

When the priority is set to "

*

BROADCAST", no receiver

can answer the paging.

The paging will be heard in priority to any other

performances (of lower priority) including ongoing

communications between stations. (→P. 22)

When you have fi nished paging, press

6

OFF or hang

up the handset.

Handset

or

or