CONTREX CX-1102 - Manual (Page 33)

Page 31
App Select (CP-202) = 3: The CX-1102 controls only the Dancer Trimmed Unwind roll
1) The unwind is a bipolar or a unipolar reversible or a unipolar drive:
a) The unwind roll jogs forward until the dancer is in the Full position.
b) The unwind roll goes into Jog Stop until the unwind roll stops.
c) Then the unwind roll transitions to F-Stop.
d) The system state transitions to F-Stop State.
2) The unwind is a unipolar brake and the wind is bipolar or unipolar reversible:
a) The unwind roll is put into H-Stop.
b) The unwind roll waits until the dancer is in the Full position.
c) Then the unwind roll transitions to F-stop.
d) The system state transitions to F-Stop State.
3) The unwind is a unipolar brake and the wind is unipolar:
a) The unwind roll is put into F-Stop.
b) The system state transitions to F-Stop State.
App Select (CP-202) = 4: The CX-1102 controls only the Dancer Trimmed Wind roll
1) The wind is a bipolar or a unipolar reversible drive:
a) The wind roll jogs in reverse until the dancer is in the Full position.
b) The wind roll goes into Jog Stop until the wind roll stops.
c) Then the wind roll transitions to F-Stop.
d) The system state transitions to F-Stop State.
2) The wind is a unipolar drive:
a) The wind roll is put into H-Stop.
b) The wind roll waits until the dancer is in the Full position.
c) Then the wind roll transitions to F-Stop.
d) The system state transitions to F-Stop State.
3) The wind is a unipolar drive and the unwind is a unipolar brake:
a) The wind roll is put into F-Stop.
b) The system state transitions to F-Stop State.