CNB SSM2065PW - Manual (Page 7)

Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com 13
▣ Installation using the Wall Mount Bracket
z Before install, you must have bracket with mount gasket.
z Refer to the Installation of mount gasket section.
① Install Wall Mount Bracket on wall ② Wire cables to terminal blocks on the PCB in Wall
Mount Bracket.
③ Hook up “Drop Prevention Spring” on main body to
prevent camera from unexpected drop and connect
Main Body Cable to Main Body Connector in Wall
Mount Bracket.
④ Line up the mold lines and assemble main body to
Wall Mount Bracket.
⑤ Turn main body on its axis in CW(Clockwise)
direction and after assembling them, screw main
body to Wall Mount Bracket to protect them from
separation by vibration or others.
2. INSTALLATION 2. INSTALLATION
Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com 14
▣ Installation using Pendant Mount Bracket
z Before install , you must have bracket with mount gasket.
z Refer to the Installation of mount gasket section.
① To pass cables to upside of ceiling, Please make a
hole with 50 ~ 60mm diameter on the ceiling
panel and attach the Ceiling mount bracket on it.
② Wire cables to terminal blocks on the PCB in
Ceiling Mount Brakcket.
③ Hook up “Drop Prevention Spring” on main body to
prevent camera from unexpected drop and connect
Main Body Cable to Main Body Connector in Ceiling
Mount Bracket.
④ Insert the main body into the pendant mount
bracket with the molding lines on each part
being aligned and turning clockwise.
2. INSTALLATION