CNB SSM2065PW - Manual (Page 3)

Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com 5
▣ Features
„ Camera Specifications
z CCD Sensor : 1/4" Interline Transfer CCD
z Zoom Magnification : 10x Optical Zoom, 10x Digital Zoom (Max. 100x Zoom) Æ Model SM2065N(P)
z Day & Night Function
z Various Focus Mode : Auto-Focus / Manual Focus / Semi-Auto Focus.
z Independent & Simultaneous Camera Characteristic Setup in Preset operation
„ Powerful Pan/Tilt Functions
z Max. 360°/sec high speed Pan/Tilt Movement.
z Using Vector Drive Technology, Pan/Tilt motions are accomplished in a shortest path. As a result, time to
target view is reduced dramatically and the video on the monitor is very natural to watch.
z For jog operation using a controller, since ultra slow speed 0.05°/sec can be reached, it is very easy to
locate camera to desired target view. Additionally it is easy to move camera to a desired position with
zoom-proportional pan/tilt movement.
„ Preset, Pattern, Swing, Group, Privacy Mask and More…
z Max. 127 Presets are assignable and characteristics of each preset can be set up independently, such as
White Balance, Auto Exposure, Label and so on.
z Max. 8 set of Swing action can be stored. This enables to move camera repetitively between two preset
positions with designated speed.
z Max. 4 of Patterns can be recorded and played back. This enables to move camera to follow any trajectory
operated by joystick as closely as possible.
z Max. 8 set of Group action can be stored. This enables to move camera repetitively with combination of
Preset or Pattern or Swing. A Group is composed of max. 20 entities of Preset/Pattern/Swings.
z Privacy Masks are assignable, not to intrude on other’s privacy. (4 Privacy Zones)
Æ Only available with 10x Models.
„ PTZ(Pan/Tilt/Zoom) Control
z With RS-485 communication, max. 255 of cameras can be controlled at the same time.
z Pelco-D or Pelco-P protocol can be selected as a control protocol in the current version of firmware.
„ OSD(On Screen Display) Menu
z OSD menu is provided to display the status of camera and to configure the functions interactively.
z The information such as Camera ID, Pan/Tilt Angle, Alarm Input and Preset can be displayed on screen.
1. INTRODUCTION
Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com 6
„ Alarm I/O Functions
z 4 alarm sensor Inputs and 1 alarm output relay are available.
z To reject external electric noise and shock perfectly, alarm sensor Input is decoupled with photo coupler.
z The signal range of sensor input is from DC 5.0 to 12.0 volts to adopt various applications.
z Relay output is able to connect. (max. 125VAC, 0.5A or 24VDC, 1A)
z If an external sensor is activated, camera can be set to move to the corresponding Preset position.
„ Easy Installation and Perfect Outdoor Environment Compatibility
z Fans and heaters are built-in in camera for cold and hot temperature environment.
Also idealistic mechanical design protects camera from water and dust. (IP66)
z It is easy to install and maintain camera with terminal for cable connection in brackets.
1. INTRODUCTION