Operation – CNB SSM2065PW User Manual
Page 11
Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com
21
▣
Group
z
Function
The group function allows running sequence of Presets, Pattern and/or Swings. Max 8
group can be stored. Each group can have max 20 action entities which can be preset,
pattern or swing. Preset speed can be set up and the repeat number of Pattern & Swing
can be set up in Group setup. Dwell time between actions can be set up also.
z
Set Group
Use OSD Menu to create a Group.
z
Run Group
Method 1)
Method 2)
ex) Run Group 7 :
ex) Run Group 7 :
z
Delete Group
To delete Group, use OSD menu.
3. OPERATION
Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com
22
▣
Other Functions
z
Power Up Action
This function enables to resume the last action executed before power down. Most
of actions such as Preset, Pattern, Swing and Group are available for this function
but Jog actions are not available to resume.
z
Auto Flip
In case that tilt angle arrives at the top of tilt orbit (90°), zoom module camera keep
moving to opposite tilt direction (180°) to keep tracing targets. As soon as zoom
module camera passes through the top of tilt direction(90°), images should be
reversed automatically and F appears in screen. If this function is set to OFF, tilt
movement range is 0 ~ 95°.
z
Parking Action
This function enables to locate the camera to specific position automatically if
operator doesn’t operate the controller for a while. The Park Time can be defined
as an interval from 1 minute to 4 hours.
z
Alarm Input
4 Alarm Inputs are used. If an external sensor is activated, camera can be set to
move to corresponding preset position. It is noted that the latest alarm input is
effective if multiple sensors are activated.
z
Privacy Zone Mask
To protect privacy, Max. 4 Privacy Masks can be created on the arbitrary position to
hide objects such as windows, shops or private house. With Spherical Coordinates
system, powerful Privacy Zone Mask function is possible.
z
GLOBAL/LOCAL
Image Setup
WB(White Balance) and AE(Auto Exposure) can be set up independently for each
preset. There are 2 modes, "Global" mode & "Local" mode. The Global mode
means that WB or AE can be set up totally and simultaneously for all presets in
"ZOOM CAMERA SETUP" menu. The Local mode means that WB or AE can be set
up independently or separately for each preset in each preset setup menu. Each
Local WB/AE value should activate correspondingly when camera arrives at each
preset location.
During jog operation, Global WB/AE value should be applied. All Local WB/AE
value do not change although Global WB/AE value changes.
z
SemiAuto Focus
This mode exchanges focus mode automatically between Manual Focus mode and
Auto Focus mode by operation. Manual Focus mode activates in preset operation
and Auto Focus mode activates during jog operation. With Manual mode at presets,
Focus data is memorized in each preset in advance and camera calls focus data in
correspondence with presets as soon as camera arrives at a preset. It should
shorten time to get focuses
.
Focus mode changes to Auto Focus mode automatically when jog operation starts.
3. OPERATION